Reduce utility waste through reliable consumption data, safe operating changes and whole-life investment decisions. Separate lower use from lower prices.
Facilities Managers can help control utility costs by understanding what the building uses and why. The starting point is evidence about consumption and service needs, rather than an assumption that every contract or asset should be cut.
Establish a usable baseline
Check meter coverage, bills, tariffs, operating hours and occupancy. Compare like periods and account for weather or changes in service. Keep electricity, fuel and water units explicit, and separate a consumption change from a price change.
Walk the building and test an explanation
- Look for plant running outside the required schedule.
- Investigate unexpected overnight use or unexplained water flow.
- Check damaged insulation, leaks and conflicting heating/cooling settings.
- Ask users where controls or services are not working as intended.
- Confirm the reason for a setting before changing it.
Only authorised people should change plant or electrical controls. Protect ventilation, water hygiene, frost protection, accessibility, security and emergency systems. A switch-off campaign should identify what can be turned off and what must remain available.
Review procurement on a comparable basis
Compare unit rates, standing charges, contract length, termination provisions and the usage assumptions behind an offer. Ask a broker to explain fees, commission, market coverage and any relationship with a supplier. Do not assume a longer contract or a lower headline rate produces the best overall result.
Make an investment case
For an asset or controls project, state the installed cost, operating assumptions, expected consumption change, maintenance implications and uncertainty. Simple payback is the initial cost divided by an appropriate estimate of annual net savings; it is a screening measure, not a complete investment appraisal.
Test scenarios where occupancy, prices or performance differ from the forecast. Avoid presenting a supplier’s projected saving as a measured result. Include safe commissioning, staff training and a plan to verify performance after installation.
Match services to actual need
Use occupancy evidence to review cleaning, catering, lighting or conditioned areas. The local pattern matters; do not assume that every site is quiet on the same weekdays. Evaluate proposed changes against service standards and the needs of users who are present.
Verify what changed
Record the action, owner and implementation date. Compare performance on an appropriate basis, check unintended effects and explain uncertainty. Keep a change only when the result supports the service and the business case.
Frequently asked questions
How can an FM distinguish a real energy saving from a lower bill?
Measure consumption in the relevant units and compare suitable periods, accounting for weather, occupancy and operating hours. A lower tariff can reduce the bill without reducing energy use, while a price rise can conceal a consumption reduction.
Should low occupancy automatically mean switching off building services?
No. Establish which services the occupied building needs and protect safety, ventilation, water hygiene, frost protection and emergency functions. Agree changes with the appropriate technical owners and check the result.
Key takeaways
- Separate consumption, price and service changes.
- Protect essential controls when reducing waste.
- Verify forecasts after implementation.
Conclusion
Utility control is strongest when the savings case and the operational requirements use the same evidence. Remove avoidable use, procure carefully and confirm the outcome.
Next steps
For more detail, read Data-Driven Facilities Management.
Maxwell Stephens specialises in Facilities Management recruitment. Discuss the capability your team needs through our Technical FM recruitment service.


